欢迎光临《计算力学学报》官方网站!
无腹筋RC悬臂梁抗剪强度及尺寸效应理论研究
Size Effect Theory on Shear Strength of RC Cantilever Beams without Stirrups
投稿时间:2019-10-10  修订日期:2019-12-10
DOI:
中文关键词:  剪跨比  纵筋率  抗剪强度  钢筋混凝土悬臂梁  尺寸效应
英文关键词:Shear-span ratio  Longitudinal reinforcement ratio  Shear strength  RC cantilever beam  Size effect
基金项目:国家重点基础研究发展计划(973计划);国家自然科学基金项目(面上项目,重点项目,重大项目)
作者单位E-mail
金浏 北京工业大学建筑工程学院 jinliu@bjut.edu.cn 
王涛 北京工业大学建筑工程学院  
杜修力 北京工业大学建筑工程学院 duxiuli@bjut.edu.cn 
摘要点击次数: 45
全文下载次数: 0
中文摘要:
      为研究剪跨比及纵筋率对无腹筋RC梁剪切破坏及抗剪强度尺寸效应的影响,采用三维细观数值模拟方法,建立了RC梁剪切破坏力学分析模型,研究了剪跨比及纵筋率对RC梁剪切破坏及抗剪强度尺寸效应的影响机制与规律。研究结果表明:RC梁抗剪强度表现出极为显著的尺寸效应现象;RC梁抗剪强度随剪跨比的增大而减小,随纵筋率的增大而增大;剪跨比较小时,纵筋率对抗剪强度的影响尤为显著。此外,基于Ba?ant材料层次尺寸效应律,提出了考虑剪跨比及纵筋率影响的RC梁抗剪强度尺寸效应理论公式。对比试验结果,验证了所提公式的准确性与合理性。
英文摘要:
      In order to study the effects of shear-span ratio and longitudinal reinforcement ratio on the shear failure and size effect of shear strength of RC beams without stirrups, a mechanical analysis model for shear failure of RC beams was established by using 3D meso-scale numerical simulation method, and the mechanism and regularity of the effects of shear-span ratio and longitudinal reinforcement ratio on the shear failure and size effect of shear strength of RC beams were studied. The results showed that the shear strength of RC beams exhibits significant size effect; the shear strength of RC beams decreases with the increase of shear-span ratio and increases with the increase of longitudinal reinforcement ratio; the effect of longitudinal reinforcement ratio on shear strength is particularly significant when the shear-span ratio is small. In addition, based on the Ba?ant’s Size Effect Law (SEL) for materials, a theoretical formula for the size effect of shear strength of RC beams considering the effects of shear-span ratio and longitudinal reinforcement ratio is proposed. The accuracy and rationality of the proposed formula are verified by comparing the experimental results.
  查看/发表评论  下载PDF阅读器
您是第6445034位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计