欢迎光临《计算力学学报》官方网站!
杨雨厚,刘来君,孙维刚,郝天之.等截面抛物线无铰拱挠度影响线实用解析解
Practical analytical solution of deflection influence line of clamped parabolic arch bridges with uniform section[J].计算力学学报,2017,(4):480~486
等截面抛物线无铰拱挠度影响线实用解析解
Practical analytical solution of deflection influence line of clamped parabolic arch bridges with uniform section
Practical analytical solution of deflection influence line of clamped parabolic arch bridges with uniform section
投稿时间:2016-03-09  修订日期:2016-09-12
DOI:10.7511/jslx201704013
中文关键词:  桥梁工程  抛物线无铰拱  挠度影响线  弹性中心法  实用解析解
英文关键词:bridge engineering  parabolic fixed-end arch bridge  deflection influence line  elasticity center method  practical analytical solution
基金项目:国家自然科学基金(51408040);广西自然科学基金(2015GXNSFBA139229);云南省交通科技计划(云交科2013(A)02)资助项目.
作者单位E-mail
杨雨厚 广西交通科学研究院有限公司, 南宁 530007;长安大学 公路学院, 西安 710064 280412086@qq.com 
刘来君 广西交通科学研究院有限公司, 南宁 530007  
孙维刚 广西交通科学研究院有限公司, 南宁 530007  
郝天之 长安大学 公路学院, 西安 710064  
摘要点击次数: 69
全文下载次数: 146
中文摘要:
      为解决弧长微分表达式复杂导致抛物线拱挠度解析计算繁琐的难题,采取有简单弧长微分表达式的近似曲线拟合抛物线的方法,通过以沿曲线的曲率和为量化指标评价3种曲线(直线)的拟合度,最终得出悬索线拟合度最优的结论。在此基础上,利用基本力学原理,推导出抛物线无铰拱挠度影响线解析计算公式,最后应用于实例,并与有限元分析结果进行对比。算例结果表明,公式计算与有限元分析结果最大相差不超过1%,具有非常高的工程精度,可用于工程实践。
英文摘要:
      In order to overcome the complexity in determining deflection of a parabolic arch using the analytical expression of arch length in differential form,an approximate curve that has a simple differential expression of its arc length to fit a parabola is considered to be the best way.Ultimately,the best fitting suspension curve is obtained according to the values of the curvature sum of three kinds of curves.On this basis,the analytical formula for calculating deflection influence line of clamped parabolic arch bridges with uniform section is derived based on fundamental mechanics principles,and then applied to an example.The results are compared with finite element analysis results.Numerical results show that the values obtained by the analytical formula are different from the finite element results by less 1%.Thus the analytical formula satisfies the engineering requirement and can be used in engineering practice.
查看全文  查看/发表评论  下载PDF阅读器
关闭
您是第3477705位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计