欢迎光临《计算力学学报》官方网站!
张九民,顾汝佳,李洪双,夏爽.基于响应面法的复合材料连接结构可靠性分析
Application of response surface method on structural reliability analysis of pin joint in composites[J].计算力学学报,2016,33(5):711~716
基于响应面法的复合材料连接结构可靠性分析
Application of response surface method on structural reliability analysis of pin joint in composites
Application of response surface method on structural reliability analysis of pin joint in composites
投稿时间:2015-03-31  修订日期:2015-09-12
DOI:10.7511/jslx201605009
中文关键词:  复合材料  可靠性  连接  概率强度  响应面法
英文关键词:composites  reliability  pin joint  probabilistic strength analysis  response surface method
基金项目:国家自然科学基金(11102084);中央高校基本科研业务费(3082015NS15007);江苏高校优势学科建设工程资助项目.
作者单位
张九民 中国航空工业集团公司 第一飞机设计研究院, 西安 710089 
顾汝佳 南京航空航天大学 航空宇航学院, 南京 210016 
李洪双 南京航空航天大学 航空宇航学院, 南京 210016 
夏爽 南京航空航天大学 航空宇航学院, 南京 210016 
摘要点击次数: 624
全文下载次数: 10326
中文摘要:
      复合材料的力学性能参数比金属材料呈现出更大的分散性。本文提出采用加权线性响应面法对复合材料单钉连接结构进行可靠性分析。采用三维有限元模型进行复合材料单钉连接的确定性渐进失效分析。单向铺层的力学性能参数和强度参数均考虑为输入随机变量,用于可靠性分析。详细研究了不同失效准则和不同刚度退化方法的影响。结果表明,Olmedo-Santiuste失效准则与Camanho-Matthews刚度退化方法的组合能够给出与试验均值最接近的强度分析结果。另外,还仔细研究了响应面参数f的影响。结果表明,取f=1的线性加权响应面能够为复合材料单钉连接可靠性分析提供较好的统计特性逼近值。
英文摘要:
      Composite materials exhibit much more scattering material properties than metallic materials.The paper presents an application of weighted response surface method on structural reliability analysis of a composite pin joint.A three-dimensional finite element model is used to perform the deterministic progressive failure analysis of composite pin joint.The mechanical properties and ultimate strengths of one lamina are modeled as random variables and considered in the process of structural reliability analysis.A detailed study on the effect of different failure criteria and stiffness degradation rules is performed.This study shows that the combination of Olmedo-Santiuste failure criteria and Camanho-Matthews stiffness degradation rules produces the closest bearing strength result to experimental mean value.Another detailed study is also performed to investigate the effect of response surface parameter f.The results show that linear weighted response surface function with f=1 is capable of providing good approximations of statistical characteristics of the bearing strength of pin joints in composite laminates for structural reliability analysis.
查看全文  查看/发表评论  下载PDF阅读器
关闭
您是第3366112位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计